How To Plug a Motorcycle Tire To Get Back on the Road

You do not want to end up on the side of the road with a punctured tire. This is why every bike rider should have a patch kit on hand to take care of quick plugging. Even if you have the best dirt bike tires available, you could run over anything on the road. All street motorcycle tires can sustain damage from screws, nails and rocks, so you should have some basic knowledge of plugging.

Non-Tube Tires

With a non-tube tire, you first need to remove the object. Once that is taken care of, you can install the plug. Your patch kit should come with instructions with how to put in the plug. This step will vary significant from one kit to the next.

With a mushroom style plug, you can put it into the hole using a pair of pliers. Meanwhile, a strip style plug will require a unique insertion tool. You need to put it in until half of an inch sticks out, and you can cut off the remainder with scissors.

Tubed Tires

You will need a more extensive kit if you ride a bike that uses tubed tires. After you remove the tube, you will have to deflate it entirely. You need to roughen the surface of the area with a “scrubber” that should have come in your kit. You can apply the patch to the roughened surface. With the tube patched, you can then re-inflate the tire and put it back onto your bike. This method is ideal for the best motorcycle cruiser tires that spring leaks.

You never know what you might encounter on the road. You need to be prepared with the right patch kit or else you could end up in the middle of nowhere with no cell service. Order your tires and your kit online today so that you can be ready for anything.